Connecting to the event using a guest link in browser
Enter the link into your browser
It is necessary to introduce yourself
Сlick on the settings icon
Select and check your equipment
Camera, voice and sound settings
Set up your camera
Set up your microphone and audio output
Selecting interface language
You can use the chat
Audio channels setting
Screen sharing
Problem solving
For verification, it is recommended (if possible) to establish a connection through an alternative provider, for example, a mobile network. Most modern smartphones allow, when connected by cable to a PC, to distribute the Internet through it, or via Wi-Fi in the case of a laptop
The order of connection in the presence of own VKS equipment
The VCS system can be any type of device: Cisco (Tandberg), Sony, Polycom, LifeSize, etc. A mandatory requirement is to connect to the Internet at a real IP address and work on the video protocol H.323.
The procedure is as follows:
- 2.1. Inform the IP address of the VKS terminal/server (the real IP address), the contact phone number of the technical specialist providing VKS service during the conference, to the VKS operators
Technical support +7 965 202-17-04 e-mail: vc.support@mumcfm.ru
- 2.2. Check the connection with the use of the VCS equipment no later than 1 day before the start date of the event.
For secure networks it is very important to keep in mind the following aspects:
For correct operation, it is necessary to allow all incoming and outgoing requests to the ip address: 212.100.153.131 by ports:
— for SIP connections TCP/UDP 443, 5060, UDP 20000-65000
— for H.323-TCP/UDP connections 443, 1720, 1719, UDP 20000-65000
Comments 0
CommentateOnly authorized users can post comments.
Authorization